Fridge Gap Co.
Stackable Vented Refrigerator Trim
Close the gap. Keep the airflow. No contractor required.
Looking for refrigerator trim? Fridge Gap Co. offers stackable stainless steel trim kits for the open space above standard 30-inch, 33-inch, and 36-inch refrigerators.
Brushed stainless steel refrigerator trim fills the gap above your refrigerator for a clean, finished look without a custom trim kit. Stackable trim pieces build the height your gap needs while maintaining the airflow your refrigerator requires.
- Maintains refrigerator ventilation
- DIY-friendly installation with included screws
- Stackable pieces build your height
- A fraction of the cost of custom refrigerator trim kits
Buildable height
Each refrigerator trim kit is $89 and includes five stackable stainless steel trim pieces, each approximately 1 inch tall. Need to fill a taller gap? Taller gaps may require additional kits, so buy as many kits as your opening needs.
Specifications
- Material
- Brushed stainless steel
- Available widths
- 30", 33", 36"
- Piece height
- Approximately 1 inch per trim piece
- Pieces per kit
- Five stackable trim pieces
- Design
- Vented for airflow
- Installation
- Top piece screws to the cabinet above; pieces stack downward
Always confirm your refrigerator manufacturer's clearance requirements before installing.
Fridge Gap Co. is designed for the space above a refrigerator, between the top of the appliance and the upper cabinet. It is not designed to fill the narrow side clearances between the refrigerator and surrounding cabinets.
Designed by Fridge Gap Co. as an affordable, removable alternative to a custom refrigerator trim kit — patent pending. Questions about fit? Contact Fridge Gap Co.
A Smarter Way to Finish the Gap Above Your Fridge
When a refrigerator is shorter than the cabinet opening above it, an awkward gap is left behind. That space collects dust, traps grease, and makes an otherwise polished kitchen look unfinished. The Fridge Gap Co. vented trim fills that gap with clean, brushed stainless steel pieces that create a more finished, built-in appearance.
Unlike a solid filler panel that can restrict airflow, our trim kit uses vented, stackable pieces that preserve the ventilation your refrigerator needs to operate efficiently. It's available in 30", 33", and 36" widths — the most common refrigerator sizes — with five pieces per kit, each approximately 1 inch tall, so you can build the height your gap needs without custom fabrication.
Installation is DIY-friendly: use the provided screws to secure the top trim piece to the cabinet above your refrigerator, then stack additional trim pieces downward. The trim can be removed later for appliance replacement or maintenance. Not sure what size you need? Read our measuring guide or compare options in our guide on how to fill the gap above your refrigerator.
Frequently Asked Questions
What is the Refrigerator Gap Vent Cover?
A stackable stainless steel refrigerator trim kit for the gap above your refrigerator, between the top of the appliance and the upper cabinet. Each kit includes five vented trim pieces, each approximately 1 inch tall, that stack to build the height your gap needs.
How much does it cost?
$89 per kit. Taller gaps may require additional kits. It is an affordable alternative to a custom refrigerator trim kit, which can cost hundreds of dollars.
What sizes are available?
Standard 30, 33, and 36-inch widths.
How tall is it?
Each trim piece is approximately 1 inch tall, and each kit includes five stackable stainless steel trim pieces. For taller gaps, add trim pieces from additional kits.
How do I measure for the right fit?
Measure the cabinet-to-cabinet width (not the fridge width) and the vertical gap height. See our how to measure your refrigerator gap guide.
Does fit depend on my refrigerator's clearances?
Yes — compatibility depends on your opening dimensions and your refrigerator manufacturer's required clearances; always check your appliance manual before installing.
How is it installed?
Use the provided screws to secure the top trim piece to the cabinet above your refrigerator, then stack additional trim pieces downward as needed. Follow your refrigerator manufacturer's ventilation and clearance requirements.
Is it permanent?
No — fully removable for appliance replacement, cleaning, or future kitchen updates.
Why vented instead of a solid panel?
Refrigerators need airflow to dissipate heat from the condenser coils. A solid panel can trap heat and reduce efficiency, while the vented trim pieces allow warm air to escape naturally.
Is it currently available to order?
It is currently sold out. Use the Notify Me When Available form on this page to hear when it becomes available.
Where can I buy a refrigerator gap cover?
Direct from Fridge Gap Co. The product is currently sold out, so use the Notify Me When Available form on this page to hear when it becomes available.
Can I buy a ready-made vented filler for above my fridge?
Yes. Fridge Gap Co. makes a ready-made, vented refrigerator trim kit for the open space above standard 30, 33, and 36-inch refrigerators.
Is this a universal refrigerator trim kit?
No. It isn't a brand-specific trim kit. It fits standard 30, 33, and 36-inch cabinet openings — measure your cabinet-to-cabinet width first.
Does it work with counter-depth refrigerators?
Yes. It works with both standard-depth and counter-depth refrigerators whenever there's an open space between the top of the fridge and the cabinet above.
Learn more in our how to measure your refrigerator gap guide and our refrigerator ventilation and gap fillers explained guide.